Fastener & Thread Calculators

Clearance Hole Chart for Bolts & Screws (Inch & Metric)
Copied! Clearance Hole Chart Drill sizes and hole diameter limits for bolt and screw through-holes, inch and metric, in normal, close, and loose fit. Fastener Series Inch Metric Fit Class All three fits Normal only Close only Loose only Search Screw Size Hole Tolerances + More Print / PDF Clearance hole sizes for inch fasteners per ASME B18.2.8 JavaScript is required for filtering and sorting. Here are the most common normal-fit clearance holes for reference: Screw Size Normal Drill Close Drill Loose Drill #6 #18 #23 #13 #10 #2 #5... Read more...
Bolt Torque Chart & Calculator
Copied! Bolt Torque Chart & Calculator Calculate tightening torque for any bolt — SAE Grade 2/5/8, metric ISO 8.8/10.9/12.9, or stainless steel. Supports UNC, UNF, metric coarse, and metric fine threads. All values computed using T = K × F × d at 75% of proof load per Machinery’s Handbook, 29th Edition. A standard bolt torque chart lists the recommended tightening torque specifications for common bolt sizes and grades. The torque values on this page are calculated from T = K × F × d, where K is the torque coefficient (0.20 dry, 0.18 lubricated), F is the target preload at 75%... Read more...
Tap Drill Size Chart (UNC, UNF & Metric)
Copied! Tap Drill Size Chart Complete UNC, UNF, and metric ISO tap drill size chart with target drill diameters, nearest standard drill bits, clearance drill sizes, and adjustable thread engagement percentage. All values verified against Machinery’s Handbook, 29th Edition. A tap drill size chart — also called a drill and tap chart — is a reference table that shows the correct drill bit diameter to use before tapping a threaded hole. The drill size is determined by the minor diameter tolerances for the specified thread class. This standard tap drill... Read more...